Manual Powder Flow Tester Manufacturer,Supplier and Exporter in India
Product Code : EL-OLT-11255
Quick Answer: The Manual Powder Flow Tester gives a simple flowability index for powders and granules. It uses a cylinder with interchangeable discs at the bottom, each with a hole of a different diameter, and checks whether the powder falls freely through the hole.
Last updated: October 2026
Key Features
Cylinder with interchangeable bottom discs with holes of different diameters
Measures whether powder falls freely through the hole in the disc
Test sample: 60 grams
Repeat with smaller discs until the powder no longer flows
Technical Specifications
Specification
Value
Construction
Cylinder with interchangeable discs
Disc holes
Different diameters
Sample charge
60 grams
Fill level
Roughly 1 centimetre below the top
About This Product
In use, 60 grams of powder is carefully charged into the cylinder until it is roughly 1 centimetre from the top, and the funnel is tapped slightly so the powder settles without compacting. If the powder falls freely through the hole, the test is repeated with discs that have smaller holes until it no longer flows, giving a flowability index for that material.
Frequently Asked Questions
Q1. How much powder is used for a test? 60 grams of powder is charged into the cylindrical container until it is roughly 1 centimetre from the top.
Q2. What happens if the powder flows through the disc? The test is positive, so it is repeated with smaller discs until the powder no longer falls freely through the hole.
.jpg)
.jpg)
