Hydrometer Jar 100 I/D H300mm Manufacturer,Supplier and Exporter in India

Product Code : SCL-GW-12028

The Hydrometer Jar 100 I/D H300mm is a laboratory vessel used to hold liquid samples while a hydrometer floats freely for density, specific gravity, and relative-density readings. It is suitable for schools, colleges, universities, research laboratories, and quality-control users who need a tall jar for hydrometer testing.

Product Description

The Hydrometer - Jar - 100 I/D - H 300mm from Scientific Equipment is designed for hydrometer reading procedures where the liquid sample must provide enough depth and width for the instrument to float without obstruction. The supplied product data confirms a 100 I/D measurement and 300mm height.

This hydrometer jar supports practical work in chemistry, physics, density measurement, buoyancy demonstrations, solution testing, and quality-control checks. It helps users observe the liquid meniscus clearly and take readings from a compatible hydrometer scale under supervised laboratory conditions.

Key Features

• 100 I/D specification: provides a listed internal-diameter reference for hydrometer use.
• 300mm height: supports liquid depth required for compatible hydrometers to float freely.
• Hydrometer testing format: designed to hold liquid samples during density and specific gravity readings.
• Clear observation workflow: helps users read the hydrometer at the liquid meniscus.
• Educational value: supports hands-on learning of buoyancy, density, and relative density.
• Laboratory application: useful for teaching labs, testing labs, and routine solution comparison work.
• Reusable vessel: suitable for repeated use when cleaned, inspected, and stored correctly.

Technical Specifications

What's Included in the Kit

• 1 x Hydrometer Jar 100 I/D H300mm
• Hydrometer, thermometer, lid, stopper, or additional accessories

Applications / Uses

• Holding liquid samples for hydrometer readings
• Specific gravity and relative-density testing
• Liquid density comparison in chemistry practicals
• Buoyancy demonstrations in physics laboratories
• Salt solution, sugar solution, and alcohol-water mixture testing where method-compatible
• Quality-control sample checks and routine liquid testing
• STEM classroom demonstrations of floating-body measurement principles

How to Use the Hydrometer Jar 100 I/D H300mm

1. Inspect the jar for cracks, chips, residue, stains, or instability before use.
2. Clean and dry the jar if contamination may affect the reading.
3. Pour the liquid sample into the jar to a depth that allows the hydrometer to float freely.
4. Gently lower the compatible hydrometer into the liquid without dropping it.
5. Wait until the hydrometer stops moving and is not touching the jar wall or base.
6. Read the scale at the liquid meniscus according to the hydrometer instructions.
7. Record temperature if the test method requires temperature correction.
8. Remove the hydrometer, empty the sample safely, and clean the jar after use.

Safety note: Wear eye protection, gloves, and a lab coat when testing chemical liquids. Do not use damaged jars, and confirm chemical compatibility before testing corrosive, hot, volatile, or hazardous liquids.

Care & Maintenance

• Clean the jar after each use to prevent residue from affecting future readings.
• Dry fully before storage to reduce staining, contamination, or odour.
• Store upright in a protected cabinet to avoid impact damage.
• Remove the jar from service if it becomes cracked, chipped, unstable, or difficult to clean.

Why Choose Scientific Equipment

Scientific Equipment manufactures and exports scientific laboratory instruments, lab experiment setups, science kits, mathematics kits, didactic models, and STEM models. The brand supplies laboratory and educational equipment for schools, colleges, universities, research laboratories, and institutional procurement teams. Its product range supports chemistry, physics, biology, mathematics, general laboratory, and STEM education requirements for domestic and international buyers.

Frequently Asked Questions

What is a Hydrometer Jar 100 I/D H300mm used for?

A Hydrometer Jar 100 I/D H300mm is used to hold liquid samples while taking readings with a hydrometer for density, specific gravity, or relative density.

What does 100 I/D mean in this product?

100 I/D refers to the listed internal-diameter specification. The unit should be confirmed before final catalogue publication.

What does H 300mm mean?

H 300mm refers to the listed height of the hydrometer jar. This height supports liquid depth for compatible hydrometers.

Does this jar include a hydrometer?

The confirmed item is one hydrometer jar. A hydrometer, thermometer, stopper, or other accessories should be listed only after verifying the supplied configuration.

Can this hydrometer jar be used in school laboratories?

Yes. It is suitable for supervised school, college, and university laboratories where students learn density, buoyancy, and specific gravity measurement.

What material is the jar made from?

The supplied product name does not confirm the material. Add the exact material only after verification from the manufacturer or catalogue.

For related laboratory products, explore hydrometer cylinders, Scientific Equipment glassware, chemical laboratory instruments, and laboratory instruments and equipment.

```